COMPLETE CPTU SET |
|||
 |
2000 | Pusher complete including: | qty: |
| 2001 | 200kN Pusher machine | 1 | |
| 2002 | Hydraulic Power Pack | 1 | |
| 2003 | Hydraulic Auger Head | 1 | |
| 2004 | Anchoring Auger 300 mm | 4 | |
| 2014 | Anchoring Auger 200 mm | 4 | |
| 2005 | Anchoring Beam | 4 | |
| 2006 | Anchoring Clamps | 4 | |
| 6330 | Depth Encoder | 1 | |
| 3033 | CPT Rods 36 mm diam. | 30 | |
| 9200 | CPT Probe Memocone III incl: | ||
| 9201 | Memocone III, 3 channnel | 1 | |
| CPTU probe, 100 MPa | 1 | ||
| 9211 | Sound transmitter battery tube | 1 | |
| 9073 | Battery Plug | 1 | |
| 9074 | Connection cable | 1 | |
| 9007 | Conical Point slot filter | 1 | |
| 9014 | Transport Box | 1 | |
| 9213 | Microphone pushing head | 1 | |
| Plotting software: | |||
| FREE download from the internet: http://opensounding.sourceforge.net |
|||
 |
8000 |
Datalogger PC interface, including cables,
excluding PC |
1 |
 |
2001 | Pusher/ Puller Machine, Capacity: 200kN, Intended for 1 meter 36mm diam. CPT rods. Pushes down the CPT cone at a nominal rate of 2 cm per second. Pull up rate is 5 cm per second. Handled by 2 men, the complete equipment can be transported on a pick-up van. Dimensions: l = 1325 mm, w = 1230 mm, h = 1420 mm. Pusher weight: 350 kg |
|
 |
2002 | Hydraulic Power Pack: Engine HONDA 13 HP gasoline engine. Hydraulic pump maximum pressure: 200 bar Oil tank volume: 22 litres. Weight: 65 kg |
|
 |
2004 2014 |
Anchoring Auger 300 mm diameter with
cutting bit. length = 1500 mm. Anchoring Auger 200 mm diameter with cutting bit. length = 1500 mm. |
|
 |
2003 | Torque Head with handles. Operated by two men, this drive is used to install and retreive the soil anchors. Hydraulic motor and valve. Maximum torque = 800 Nm. |
|
 |
2006 | Clamp for securing the anchoring beams. | |
 |
2005 2015 |
Anchoring Beam 100 x 150 x 2000 mm. Anchoring Beam 100 x 150 x 1500 mm. |
|
 |
2016 2017 |
Pulling adapter for Memocone and rods
without cable. Pulling adapter for cable inside rods. |
|
 |
3033 | CPT Rods 36 mm diameter x 1000 mm. Conical Thread. | |
CPTU CONES AND ACCESSORIES |
|||
 |
9201 | MEMOCONE III, 3 channel CPTU probe. Point resistance full scale: 100 MPa ( 10 ton ). Pore pressure full scale: 2000 kPa Friction full scale: 1000 kPa. Can operate in 3 different modes: 1) Cable mode 2) Memory mode and 3) Acoustic + Memory mode. Corresponds to ASTM D 5778-7 |
|
|
9205 | MEMOCONE III, 3 channel CPTU probe. Point resistance full scale: 50 MPa ( 5 ton ). Pore pressure full scale: 2000 kPa Friction full scale: 1000 kPa. Can operate in 3 different modes: 1) Cable mode 2) Memory mode and 3) Acoustic + Memory mode. Corresponds to ASTM D 5778-7 |
|
 |
9211 | SOUND TRANSMITTER BATTERY TUBE MEMOCONE
III Used in combination with 9201 or 9205 this sound transmitter will send cone data trough the rods to the surface. In this way, you can check the measured data in real time. |
|
 |
9002 | BATTERY TUBE MEMOCONE II Used in combination with 9201 or 9205, this battery tube will power the Memocone in Memory mode. |
|
 |
9213 | MICROPHONE PUSHING HEAD | |
 |
8000 |
DATA INTERFACE D - 1 for operating
MC
II and MC III together with PC Lap-top. Including acoustic receiver. 12 Volt DC Power. Including cables Excluding PC. |